Joying Technology Co., Ltd

Full Version: Universal Joying HeadUnit for Jeep Wrangler JK !?
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Sorry > first time I posted it in "News" Sad

Hello,

I´m a member of a Jeep community in Germany. A lot of Wrangler owner are interested in alternative HeadUnits instead of the Jeep UConnect-System. We created a subgroup with JK-owner to check the market. In the first step we will proof your Joying systems because your are offering the 7" system, the 10.1" system and different systems with 8" and 9" displays. most of the members awayiting results and would like to buy HeadUnits from that manufacturer from which the systems are running well for Wrangler JK with Alpine premium Soundsystem like my car.

I´m owning a Jeep Wrangler JK from 2017 with the premium Alpine soundsystem with amplifier. I prefer one of the universal 1 DIN devices with 8" or 9" Display ...

What is the difference between universal devices and the Wrangler JK-devices? Is the difference it only how to install it into the dashboard? Or are more differences by the technical specs? I know that I have to have the special powercable and canbus-adapter for Jeep Wrangler ...

Does your HeadUnit have the full functionality for that Alpine soundsystem?

What is the difference between 1 DIN- and 2 DIN-devices? Only the size?

Is it possible to order a universal device complete for Wrangler?

Quote:
Note:
1.Joying head units can't support like below: iPod, original car GPS antenna, original car back up rear camera, original car bluetooth,original car USB and original car Microphone.

What does that mean? I have ready for installation 2 external atenna: 1 for G4 (LTE) and another 1 for GSM, Radio, GPS ... are your units not working with those external antenna? I can´t believe that!

What is about carplay for Android-Smartphone: When I connect the smartphone via USB-cable with the Joying-device for the phonefunction etc. > does the communication also need bluetooth? My hope is to have a communication without Bluetooth ...

Cheers Chris
Hello, this is a wakeup call! Is there somebody available from the supportteam?!
That is what I call "perfect customerservice" :-(((

Goodbye > I will contakt another manufacturer for Android Headunits ...
(03-02-2020, 11:22 AM)JayC Wrote: [ -> ]That is what I call "perfect customerservice" :-(((  

Goodbye > I will contakt another manufacturer for Android Headunits ...

Sorry for the delayed reply because of coronavirus, we just get back to work.
Have you purchased the head unit? if not, please directly email us on here support@joyingauto.com we can help you.

Sorry for all the delay.
Okay, I didn´t found time to buy another headunit. But my questions changes:

I interessted to buy a universal 9" 1 DIN 4G 64G headunit (e.g. JY-UOS05N4GS-H) together with a Joying harness / canbus adapter for my Wrangler JK 2017 with Alpine sound system (amplifier) ...

1. Does that combination support the alpine amplifier? Do I will miss functions?

2. Where is the SDCard-slot?
3. How I can connect a HDD?
4. Is it possible to split a USB port with a USB hub in serveral USB ports?

It would be nice to geht some - especially for the 1. question - binding answers ...

Cheers Chris
(04-01-2020, 07:27 PM)JayC Wrote: [ -> ]Okay, I didn´t found time to buy another headunit. But my questions changes:

I interessted to buy a universal 9" 1 DIN 4G 64G headunit (e.g. JY-UOS05N4GS-H) together with a Joying harness / canbus adapter for my Wrangler JK 2017 with Alpine sound system (amplifier) ...

1. Does that combination support the alpine amplifier? Do I will miss functions?

2. Where is the SDCard-slot?
3. How I can connect a HDD?
4. Is it possible to split a USB port with a USB hub in serveral USB ports?

It would be nice to geht some - especially for the 1. question - binding answers ...

Cheers Chris


We have sent details to your email:email@jayc.de please kindly check it from supoort@joyingauto.com and reply. we will help you choose the right head unit.
Here's my experience. Overall, it's one of the best upgrades I have done to the Jeep behind headlights and hydro steer assist.
I have the 10.1" Stereo in my Jeep, 2016 Wrangler Rubicon.  JY-JO121N3 is my model number of the stereo.

First of all, mine came with a whole dash remodel kit. I was extremely impressed at how well everything fit. The cable harnesses and everything were very easy to install and I had it done in less than 3 hours. The most time involved process was running the new Celluar, GPS, Radio, and Microphone cables and removing the existing ones. Not hard, just takes time to do it right.

Moving on to function, the steering wheel controls all worked out of the box without any further configuration. I went ahead and got a data SIM card so that I would have cellular data connection right away, but the WiFi works great when I'm at my house. I also added a 512GB SD card during the install. This fit in the front of the unit behind the screen, which was kind of weird, but I guess it makes it easier to access. There are two USB ports on the back, and it came with some USB extensions that reach down to the glove box area, but I swapped those out for longer ones and mounted them in my a-pillar switch pods on the driver and passenger side. It appeared that one of the USB ports was an OTG port, so I ran that one to the driver side. I actually have a 1TB USB drive plugged in to the passenger side USB port and I play movies and television shows directly from that drive. I can also hook up to the OTG port on my side and access the file system files on the head unit. I've changed a couple image files and have been working on setting up a custom home page aside from the one out of the box. Everything is totally customizable if you know what you are doing since it's Android based. I have attached a small USB hub I use for my laptop to the OTG port and it worked just fine. I connected my phone and my laptop to the hub and was able to play music from my phone and browse the system files from my laptop. Charging didn't work through the hub, though, but this is probably a limitation of it not being a powered hub. It was just a cheap port replicator, so you could probably use it to attach more storage like USB sticks, but that's probably about it.

So down to the stereo quality. The equalizer that comes pre installed is very nice. But....the stereo head unit doesn't quite work well with the existing Alpine built in amps. The head unit basically doesn't have a crossover to isolate the frequencies going to the speakers. So if you try to turn up the bass, it will cause distortion on the dash and roll bar speakers, and send high frequency to the subwoofer. This is an issue with almost any custom stereo replacement while still using factory speakers. I found a module made by Crutchfield that fixed all that, though (https://www.crutchfield.com/g_751/Factory-System-Adapters.html). It was cheaper to install that than replace my speakers and install new amps.

Edit: Found a link on the Joying Auto Youtube Channel that shows how to install the harness and module to get the amp and other options to work.
https://www.youtube.com/watch?v=w8QQoRSjNUU

TLDR:
1. You will need an adapter to get the same sound quality that the original head unit. https://www.crutchfield.com/g_751/Factory-System-Adapters.html
2. The SD Card Slot on mine is behind the display.
3. You can connect a non powered USB Stick or Hard Drive through the USB ports on the back of the unit.
4. Yes, I was able to connect a 4 port USB port replicator, but phone charging didn't work.
(08-06-2020, 07:02 PM)DarkSide Wrote: [ -> ]Here's my experience. Overall, it's one of the best upgrades I have done to the Jeep behind headlights and hydro steer assist.
I have the 10.1" Stereo in my Jeep, 2016 Wrangler Rubicon.  JY-JO121N3 is my model number of the stereo.

First of all, mine came with a whole dash remodel kit. I was extremely impressed at how well everything fit. The cable harnesses and everything were very easy to install and I had it done in less than 3 hours. The most time involved process was running the new Celluar, GPS, Radio, and Microphone cables and removing the existing ones. Not hard, just takes time to do it right.

Moving on to function, the steering wheel controls all worked out of the box without any further configuration. I went ahead and got a data SIM card so that I would have cellular data connection right away, but the WiFi works great when I'm at my house. I also added a 512GB SD card during the install. This fit in the front of the unit behind the screen, which was kind of weird, but I guess it makes it easier to access. There are two USB ports on the back, and it came with some USB extensions that reach down to the glove box area, but I swapped those out for longer ones and mounted them in my a-pillar switch pods on the driver and passenger side. It appeared that one of the USB ports was an OTG port, so I ran that one to the driver side. I actually have a 1TB USB drive plugged in to the passenger side USB port and I play movies and television shows directly from that drive. I can also hook up to the OTG port on my side and access the file system files on the head unit. I've changed a couple image files and have been working on setting up a custom home page aside from the one out of the box. Everything is totally customizable if you know what you are doing since it's Android based. I have attached a small USB hub I use for my laptop to the OTG port and it worked just fine. I connected my phone and my laptop to the hub and was able to play music from my phone and browse the system files from my laptop. Charging didn't work through the hub, though, but this is probably a limitation of it not being a powered hub. It was just a cheap port replicator, so you could probably use it to attach more storage like USB sticks, but that's probably about it.

So down to the stereo quality. The equalizer that comes pre installed is very nice. But....the stereo head unit doesn't quite work well with the existing Alpine built in amps. The head unit basically doesn't have a crossover to isolate the frequencies going to the speakers. So if you try to turn up the bass, it will cause distortion on the dash and roll bar speakers, and send high frequency to the subwoofer. This is an issue with almost any custom stereo replacement while still using factory speakers. I found a module made by Crutchfield that fixed all that, though (https://www.crutchfield.com/g_751/Factory-System-Adapters.html). It was cheaper to install that than replace my speakers and install new amps.

Edit: Found a link on the Joying Auto Youtube Channel that shows how to install the harness and module to get the amp and other options to work.
https://www.youtube.com/watch?v=w8QQoRSjNUU

TLDR:
1. You will need an adapter to get the same sound quality that the original head unit. https://www.crutchfield.com/g_751/Factory-System-Adapters.html
2. The SD Card Slot on mine is behind the display.
3. You can connect a non powered USB Stick or Hard Drive through the USB ports on the back of the unit.
4. Yes, I was able to connect a 4 port USB port replicator, but phone charging didn't work.

hello, friend. really great on your review.
May I know which adapter you used for improving the head unit sound quality at last?
Because on the link you sent, there are so many harnesses. could you please directly show which link you purchased?
(08-28-2020, 01:47 AM)admin Wrote: [ -> ]
(08-06-2020, 07:02 PM)DarkSide Wrote: [ -> ]Here's my experience. Overall, it's one of the best upgrades I have done to the Jeep behind headlights and hydro steer assist.
I have the 10.1" Stereo in my Jeep, 2016 Wrangler Rubicon.  JY-JO121N3 is my model number of the stereo.

First of all, mine came with a whole dash remodel kit. I was extremely impressed at how well everything fit. The cable harnesses and everything were very easy to install and I had it done in less than 3 hours. The most time involved process was running the new Celluar, GPS, Radio, and Microphone cables and removing the existing ones. Not hard, just takes time to do it right.

Moving on to function, the steering wheel controls all worked out of the box without any further configuration. I went ahead and got a data SIM card so that I would have cellular data connection right away, but the WiFi works great when I'm at my house. I also added a 512GB SD card during the install. This fit in the front of the unit behind the screen, which was kind of weird, but I guess it makes it easier to access. There are two USB ports on the back, and it came with some USB extensions that reach down to the glove box area, but I swapped those out for longer ones and mounted them in my a-pillar switch pods on the driver and passenger side. It appeared that one of the USB ports was an OTG port, so I ran that one to the driver side. I actually have a 1TB USB drive plugged in to the passenger side USB port and I play movies and television shows directly from that drive. I can also hook up to the OTG port on my side and access the file system files on the head unit. I've changed a couple image files and have been working on setting up a custom home page aside from the one out of the box. Everything is totally customizable if you know what you are doing since it's Android based. I have attached a small USB hub I use for my laptop to the OTG port and it worked just fine. I connected my phone and my laptop to the hub and was able to play music from my phone and browse the system files from my laptop. Charging didn't work through the hub, though, but this is probably a limitation of it not being a powered hub. It was just a cheap port replicator, so you could probably use it to attach more storage like USB sticks, but that's probably about it.

So down to the stereo quality. The equalizer that comes pre installed is very nice. But....the stereo head unit doesn't quite work well with the existing Alpine built in amps. The head unit basically doesn't have a crossover to isolate the frequencies going to the speakers. So if you try to turn up the bass, it will cause distortion on the dash and roll bar speakers, and send high frequency to the subwoofer. This is an issue with almost any custom stereo replacement while still using factory speakers. I found a module made by Crutchfield that fixed all that, though (https://www.crutchfield.com/g_751/Factory-System-Adapters.html). It was cheaper to install that than replace my speakers and install new amps.

Edit: Found a link on the Joying Auto Youtube Channel that shows how to install the harness and module to get the amp and other options to work.
https://www.youtube.com/watch?v=w8QQoRSjNUU

TLDR:
1. You will need an adapter to get the same sound quality that the original head unit. https://www.crutchfield.com/g_751/Factory-System-Adapters.html
2. The SD Card Slot on mine is behind the display.
3. You can connect a non powered USB Stick or Hard Drive through the USB ports on the back of the unit.
4. Yes, I was able to connect a 4 port USB port replicator, but phone charging didn't work.

hello, friend. really great on your review.
May I know which adapter you used for improving the head unit sound quality at last?
Because on the link you sent, there are so many harnesses. could you please directly show which link you purchased?
On the Crutchfield website add your vehicle details, it will tell you which adapter's are compatible with your vehicle.