09-21-2020, 12:13 PM
Sort of the same problem here .
I have an external amplifier. The amp is permanently connected to battery and the on/off sholud be controled by the AMP-CONT wire from the Joying head unit. The problem is that there is no control signal present on the AMP-CONT output wire.
If I instead use the ANT-CONT output wire it works fine, the external amplifier is switched on.
What is the problem with the AMP-CONT line, is there some configuration needed?
I have an external amplifier. The amp is permanently connected to battery and the on/off sholud be controled by the AMP-CONT wire from the Joying head unit. The problem is that there is no control signal present on the AMP-CONT output wire.
If I instead use the ANT-CONT output wire it works fine, the external amplifier is switched on.
What is the problem with the AMP-CONT line, is there some configuration needed?