Static noise and reverse camera view slow.

[SirMacke]

Unit: JY-UQD10N4G-GT
https://www.joyingauto.eu/joying-10-1-inch-double-din-1280x800-qualcomm-snapdragon-chip-head-unit.html

There is some static noise when the HU is on and the volume is too loud, Vol 1-3 is enough.
My car has an AMP already, is there a way to turn the internal AMP off or lower the overall volume to get rid of the static?

Also, reverse camera view, when disengaging reverse, the reverse camera veiw stays on for 2-5 seconds, can this be changed?

Also, if there is another FM Radio app for this HU?
Stock one is not very good and someone ran it trough Google Translate or something.

[owernaya]

(01-31-2022, 09:51 AM)SirMacke Wrote:  Unit:  JY-UQD10N4G-GT
https://www.joyingauto.eu/joying-10-1-inch-double-din-1280x800-qualcomm-snapdragon-chip-head-unit.html

There is some static noise when the HU is on and the volume is too loud, Vol 1-3 is enough.
My car has an AMP already, is there a way to turn the internal AMP off or lower the overall volume to get rid of the static?

Also, reverse camera view, when disengaging reverse, the reverse camera veiw stays on for 2-5 seconds, can this be changed?

Also, if there is another FM Radio app for this HU?
Stock one is not very good and someone ran it trough Google Translate or something.

The static noise could be caused by a number of factors, including interference from the AMP or electrical noise in the car. To turn off the internal AMP, you would need to refer to the manual or contact on Gbwhatsapp the manufacturer for guidance. To lower the overall volume, you can try reducing the volume in the settings.

To change the reverse camera view time, you would need to refer to the manual or contact the manufacturer for guidance on how to adjust the settings.

There may be other FM Radio apps available for the JY-UQD10N4G-GT head unit, you can check the app store for your device for alternative options.

[bobber]

(02-02-2023, 06:25 AM)owernaya Wrote:  

(01-31-2022, 09:51 AM)SirMacke Wrote:  Unit:  JY-UQD10N4G-GT
https://www.joyingauto.eu/joying-10-1-inch-double-din-1280x800-qualcomm-snapdragon-chip-head-unit.html

There is some static noise when the HU is on and the volume is too loud, Vol 1-3 is enough.
My car has an AMP already, is there a way to turn the internal AMP off or lower the overall volume to get rid of the static?

Also, reverse camera view, when disengaging reverse, the reverse camera veiw stays on for 2-5 seconds, can this be changed?

Also, if there is another FM Radio app for this HU?
Stock one is not very good and someone ran it trough Google Translate or something.

The static noise could be caused by a number of factors, including interference from the AMP or electrical noise in the car. To turn off the internal AMP, you would need to refer to the manual or contact on Gbwhatsapp the manufacturer for guidance. To lower the overall volume, you can try reducing the volume in the settings.

To change the reverse camera view time, you would need to refer to the manual or contact the manufacturer for guidance on how to adjust the settings.

There may be other FM Radio apps available for the JY-UQD10N4G-GT head unit, you can check the app store for your device for alternative options.

The answers to your questions depend on the make and model of your car's head unit and reverse camera system. However, here are some general suggestions:

To reduce static noise when the volume is too loud, you can try the following:
Lower the volume to a level where the static noise is not noticeable.
Check the wiring and connections of your car's audio system, as loose or damaged connections can cause static noise.
If your car's head unit has a built-in equalizer, adjust the settings to reduce static noise.
If your car has an external amplifier, you may be able to turn off the internal amplifier of your head unit by adjusting the wiring connections. Consult your car's manual or a professional installer to determine the best way to do this.

The duration of the reverse camera view may be controlled by the software or settings of your car's head unit or reverse camera system. Consult the manual or settings of your system to see if this feature can be adjusted. If not, a professional installer may be able to modify the system to change the duration of the reverse camera view.

[altafhas]

The static noise could be caused by a number of factors, including interference from the AMP or electrical noise in the car. To turn off the internal AMP, you would need to refer to the manual or contact on Frases Motivational the manufacturer for guidance. To lower the overall volume, you can try reducing the volume in the settings.

To change the reverse camera view time, you would need to refer to the manual or contact the manufacturer for guidance on how to adjust the settings.

There may be other FM Radio apps available for the JY-UQD10N4G-GT head unit, you can check the app store for your device for alternative options.

---

The static noise could be caused by a number of factors, including interference from the AMP or electrical noise in the car. To turn off the internal AMP, you would need to refer to the manual or contact on Chordsandlyrics the manufacturer for guidance. To lower the overall volume, you can try reducing the volume in the settings.

To change the reverse camera view time, you would need to refer to the manual or contact the manufacturer for guidance on how to adjust the settings.

There may be other FM Radio apps available for the JY-UQD10N4G-GT head unit, you can check the app store for your device for alternative options.